CCTV installation rules of thumb (Archived eNewsletters)

Camera Positioning

-To reduce reflections, always position the camera/lens as forward as possible inside the housing.

-Always position fixed cameras below the horizon to eliminate sunlight glare.

-Always be aware of true east and west when designing outdoor camera systems. If cameras are facing east or west, there is a good chance you will see unwanted glare from these directions. Proper placement of cameras in relation to east and west is critical to a properly designed CCTV surveillance system.

Dome Types

-The use of tinted domes will reduce the available light to the camera. Typically, a normal tinting will reduce the light by a factor of 1 f-stop. This is equivalent to dividing the available light by 2.

-The use of mirrored domes will greatly reduce the available light to the camera. Typically a mirrored dome will reduce the light by a factor of 2 f-stops or more. This is equivalent to dividing the available light by 4.

PTZ Cameras vs. Fixed

-If a guard is available 24/7 to monitor, PTZ cameras are a practical solution.

-If searching “after the fact” is the norm, then PTZ cameras are not as practical as fixed with the proper field of view.

Megapixel vs. Analog Cameras

-Digital pan/tilt/zoom is very popular among security directors when searching for video after an incident has occurred. Megapixel cameras will give you the ability to perform digital pan/tilt and zoom features when searching for video. Megapixel camera will give you better resolution than analog cameras, but will require more hard drive capacity for storage.

Video Motion Detectors

-REMEMBER: If you can’t see it, you can’t detect it.

-Use the correct camera/lens for the desired field of view

Wiring runs with fixed mounts

-Many mounts now have accommodations for running the wiring inside the mounts and exiting just below the cameras. Make sure you utilize this feature if your mount has it to improve the aesthetics of the installation.

Get Sage's free monthly eNewsletter For Email Newsletters you can trust	Camera Positioning -To reduce reflections, always position the camera/lens as forward as possible inside the housing. -Always position fixed cameras below the horizon to eliminate sunlight glare. -Always be aware of true east and west when designing outdoor camera systems. If cameras are facing east or west, there is a good chance you will see unwanted glare from these directions. Proper placement of cameras in relation to east and west is critical to a properly designed CCTV surveillance system. Dome Types -The use of tinted domes will reduce the available light to the camera. Typically, a normal tinting will reduce the light by a factor of 1 f-stop. This is equivalent to dividing the available light by 2. -The use of mirrored domes will greatly reduce the available light to the camera. Typically a mirrored dome will reduce the light by a factor of 2 f-stops or more. This is equivalent to dividing the available light by 4. PTZ Cameras vs. Fixed -If a guard is available 24/7 to monitor, PTZ cameras are a practical solution. -If searching “after the fact” is the norm, then PTZ cameras are not as practical as fixed with the proper field of view. Megapixel vs. Analog Cameras -Digital pan/tilt/zoom is very popular among security directors when searching for video after an incident has occurred. Megapixel cameras will give you the ability to perform digital pan/tilt and zoom features when searching for video. Megapixel camera will give you better resolution than analog cameras, but will require more hard drive capacity for storage. Video Motion Detectors -REMEMBER: If you can’t see it, you can’t detect it. -Use the correct camera/lens for the desired field of view Wiring runs with fixed mounts -Many mounts now have accommodations for running the wiring inside the mounts and exiting just below the cameras. Make sure you utilize this feature if your mount has it to improve the aesthetics of the installation.
	Read more about SAGE Security and CCTV Have a security or CCTV question? Submit it to ddamron@sagetechs.com Next: ExacqVision software update Previous: Should IP cameras be UL listed?

SAGE Technology Solutions, Inc. © 2010 \| Privacy Policy \| Site Map \| Online Product Catalogue

Content on this page requires a newer version of Adobe Flash Player.